Sunday, August 30, 2015

CCIT A170W TAB FIRMWARE MT6572 4.2.2 BY FOYSAL TELECOM

MT6572___CCIT A170W__HONGXIANG__4.2.2__ALPS.JB3.MP.V1.60
http://www.4shared.com/rar/qCfj3_UQce/CCIT_A170W_TAB_FIRMWARE_MT6572.html
ProdName  : HONGXIANG
ProdModel : CCIT A170W
Device    : HONGXIANG
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.60

13 comments:

  1. Could you please send me the password

    Thx

    orwa_sd@yahoo.com

    ReplyDelete
  2. i will uplload firmware 4shared link ok no pass needed

    ReplyDelete
  3. 1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 140 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 8801034E4361726420238F0A4936A1BD
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x88 , OEM : 0103
    [eMMC] : FLASH_INF : [FORESEE] , draC
    [eMMC] : FLASH_CID : 8801034E4361726420238F0A4936A1BD
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000000E7400000
    [eMMC] : FLASH_UCP : 3700 MiB [eMMC 4 GiB]
    DEV RID : 78498765D5D6CFBF064B6C73B2C980C6
    INT RAM : 0x00020000
    EXT RAM : 0x20000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6572 , Project : tangxun72_we_jb3 , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled

    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : eMMC supported by BootLoader!

    BL : BatteryLevel : 3720 mV
    BL : BatteryLevel Ok

    BL : Flash Pre-Erase
    Total blocks to Erase : 2
    Erase : 0x0000000001400000-0x0000000000100000
    Erase : 0x0000000003100000-0x00000000E3220000
    Flash Pre-Erase Done, time used : 00:00:10

    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ...
    Use : preloader_tangxun72_we_jb3.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0013
    Update PMT by user request
    Repartition Done!

    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:01:03

    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Data Verify Done, time used : 00:00:33

    Update Mirror PMT
    Update Done!

    Update RomInfo done

    ReplyDelete
  4. where is the password <<<< Shittttt....

    ReplyDelete
  5. plz pass
    kamal.ahmad.90kk@hotmail.com

    ReplyDelete